DasLight 3 and Fade Time

The latest Daslight version

Moderators: Ksel, P-Low, TomHat, simonB

woehners
Posts: 4
Joined: Thu Jan 28, 2021 12:43 pm
Operating System: Windows

DasLight 3 and Fade Time

Postby woehners » Thu Jan 28, 2021 12:55 pm

I have a question.

I use Daslight Virtual Controller 3 with a Sushi USB Interface to DMX.


If I start the steps in the scene individually, the scanner moves correctly. As soon as I start the steps with Play, the steps are not carried out correctly.
Even creating different scenes at different speeds does not change anything in the process. Does somebody has any idea?
Last edited by woehners on Fri Jan 29, 2021 9:53 am, edited 1 time in total.

woehners
Posts: 4
Joined: Thu Jan 28, 2021 12:43 pm
Operating System: Windows

Re: DasLight 3 and Tempo

Postby woehners » Thu Jan 28, 2021 5:11 pm

i testet ist new.

the problem is when i change the fade time the scanner have the same speed.

woehners
Posts: 4
Joined: Thu Jan 28, 2021 12:43 pm
Operating System: Windows

Re: DasLight 3 and Tempo

Postby woehners » Fri Jan 29, 2021 9:52 am

I tested again and set 2 points as steps if I now set the following fade time here the result 01m00s56 is good scanner runs very slowly
00m00s56 is good scanner runs very quickly 00m04s56 scanner only runs in part of the points, not the entire area which is specified


Return to “Virtual Controller 3”

Who is online

Users browsing this forum: No registered users and 7 guests