DVC4 GOLD error dr1 im Standalone Mode

512 In, 512 out or 2x512 out. Stand Alone memory (512 out)

Moderators: TomHat, simonB

swiss
Posts: 1
Joined: Sun Aug 28, 2022 10:16 am
Operating System: Windows

DVC4 GOLD error dr1 im Standalone Mode

Post by swiss »

Hallo zusammen

Ich habe mit meinem neuen DVC4 Gold (Version von Cameo CLDVC CUE) folgendes Problem...

- Im Standalone Modus bei eingelegter Original SD Karte zeigt die Anzeige des DVC oben rechts "Err dr1"

- Wenn ich die SD Karte mit der Daslight D4 beschreiben möchte kommt folgende Fehlermeldung: "Could not write memory. Please check your device (XHL Error: 33)" Die Funktion Stand Alone wird in Daslight 4 auch erst aktiviert, wenn ich das DVC Gold über Ethernet verbinde. Im USB Mode ist die Funktion deaktiviert.

- Im Hardware Manager unter dem Punkt "StandAlone" steht ganz oben: "Device Memory Size: (An error occured while retriving memory size)"
Die Funktion Format Disk meldet "An error occured while formating disk. Please insert your SD card"

Zu meinem Setup:
Original microSD Karte mit 128MB und zweite test Karte ( microSD HC 8GB) beide mit selbem Fehler
DVC Gold Firmware 3.04 und danach DVC Gold 3.05(BETA) beide mit dem selben Fehler

Wie muss die SD Karte genau formatiert werden, wenn ich die SD Karte mal mit meinem PC versuche neu zu formatieren?
Und gibt es irgend wo eine Liste mit den ganzen Fehlercodes, um herauszufinden was schief läuft?

Für einen Hinweis, wie ich das ganze ans laufen bekomme wäre ich sehr dankbar.

Freundliche Grüsse
Patrik
TomHat
Posts: 1380
Joined: Tue Feb 23, 2016 9:11 am
Location: France
Contact:

Re: DVC4 GOLD error dr1 im Standalone Mode

Post by TomHat »

Hello,

I am sorry to read about the issues you're experiencing.
So...

First I'd recommend to use a 2Gb SD card, instead of 8Gb. Simply because it's easier for the DMX interface to handle.
You should be able to format the SD card directly from the HardwareManager software. This tool should be placed next to Daslight4 during installation, unless you willingly took it away from the list of tools to install beforehand.

Err 33 means that a file wasn't found.

Regards,
TomHat
--
Daslight Support

Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
joseserrano_01
Posts: 2
Joined: Sat Aug 05, 2023 5:04 pm
Operating System: Windows

Re: DVC4 GOLD error dr1 im Standalone Mode

Post by joseserrano_01 »

Hi, i have the same error with Daslight 5, it is solved by removing and inserting the card again but this is not viable! Urgent update needed!!!
TomHat
Posts: 1380
Joined: Tue Feb 23, 2016 9:11 am
Location: France
Contact:

Re: DVC4 GOLD error dr1 im Standalone Mode

Post by TomHat »

Hello,

Please contact our support team about this. It could be linked to a faulty SD card, or even SD card slot.
Here is the link to our support page :
https://store.daslight.com/en/support

Regards,
TomHat
--
Daslight Support

Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
Post Reply