Hi,
We have a number of different fixtures which we want to control from our DVC2 Gold but are having some serious flip outs with some of our fixtures. We are using quality shielded DMX cables and don't seem to get any problems from our avolites tiger desk. (DMX Controller)
We have 12 moving head AD VisiBeam 5R and when trying to control more than 4 they tend to start twitching and often just going off and doing random things. This has been the case since purchase as it just doesn't seem to like handling more than a few fixtures.
Could anyone offer any thing to try etc. I think it could possibly be a faulty unit as I can only imagine the signal just isn't strong enough?
Many Thanks
DVC2 GOLD / DMX Low Signal / Fixture Flip out.
-
- Posts: 463
- Joined: Fri Jul 11, 2008 10:30 am
- Location: Orlando. Florida
- Contact:
probably your best solution is to purchase a dmx splitter from Thomann or alike.
DVC does spit out dmx according to the proper spec, but some lights (especially older ones) have a problem with the refresh rate from DVC. especially suseptable are older demux units as well.
using a splitter solved my problems and you may wish to use a terminating plug at the end of the line just to make sure.
DVC does spit out dmx according to the proper spec, but some lights (especially older ones) have a problem with the refresh rate from DVC. especially suseptable are older demux units as well.
using a splitter solved my problems and you may wish to use a terminating plug at the end of the line just to make sure.
Music sets the mood Lighting sets the ambience