future request Fader Mapping
Posted: Wed May 10, 2023 6:39 am
future request
It would be great if you could put a scene time on a fader.
as an an example,
You create a scene with Value FX for a moving head. In this Value FX there is simply a point for Dimmer 0 and Tilt 0 and a point for Dimmer 255 and Tilt 255.
The fader should then work in such a way that it shifts the current value between the two points in the FX.
if, for example, the dimmer is at a value of 180 at point 2, the fader should now dim up from 0 to a maximum of 180.
Best Regards
It would be great if you could put a scene time on a fader.
as an an example,
You create a scene with Value FX for a moving head. In this Value FX there is simply a point for Dimmer 0 and Tilt 0 and a point for Dimmer 255 and Tilt 255.
The fader should then work in such a way that it shifts the current value between the two points in the FX.
if, for example, the dimmer is at a value of 180 at point 2, the fader should now dim up from 0 to a maximum of 180.
Best Regards