Daslight Forum

Posted: **Thu Jun 02, 2011 7:07 pm**

if i connect my dmx board daslight isnt responding to the signal i send out while the signal does show up if i test it withe the tools app

any tips for me ?

thx in advance

Posted: **Fri Jun 03, 2011 2:35 pm**

make sure you have dmx input selected under options

I will have the developers look into this on Monday.

Posted: **Sat Jun 04, 2011 4:43 pm**

it is configured correctly
it should work but it doesnt

Posted: **Tue Jun 07, 2011 10:49 am**

I cannot reproduce this. select tools->interface

click the + icon and make sure the input 1 is selected under one of the sockets

are you using the latest version?
did it work in a previous version?

Posted: **Tue Jun 07, 2011 6:22 pm**

wel it worked with the vertion of december 2010
whit the latest it doesnt
could be the cp (it was reseted cinse it last worked )

on my vista it seems to work (most of the time)

Posted: **Thu Jun 09, 2011 10:14 am**

There seems to be a problem with the GZM and DMXIN in the latest build. I've e-mailed you a new build to test.

Posted: **Thu Jun 09, 2011 4:19 pm**

i cant run the exe :
can not locate.

This application has failed to start because DLLOem.ddl can not be found.

Posted: **Fri Jun 10, 2011 8:44 am**

thats because you ened to put it in the right folder, it is not an installation file, it is the Daslight application.

Posted: **Sat Jun 11, 2011 9:10 am**

it works

thx

Posted: **Tue Jun 14, 2011 4:59 pm**

hey.
ihave the same problem.
i use 2dmx out and 1dmx in.
with the version dec2010 everything works fine, now i did made a update to may2011 and the dmx in is not working at all anymore.
if i use the test tool the dmx in works, but not in the main programm.
i need urgentlyx a help cause i have tomorrow party.

Posted: **Wed Jun 15, 2011 2:14 pm**

you need to swap the curent dvc 2 ap in the folder with a new one i can mail it to you if you pm me your e mail or you ask simon B to do so.

Posted: **Thu Jun 16, 2011 6:46 am**

Thanks DJ Rann.
I did send you a PM

Posted: **Tue Jun 28, 2011 8:25 am**

hi guys i have the same problem with dmx in what i need to do?thanks

Posted: **Fri Oct 05, 2012 7:09 am**

The Daslight program doesn't work with all DMX sources.
I have the same problem. I sent my interface to be tested by Daslight. Unfortunately DVC doesn't work with other pc based consoles.
While the viz is artnet compatible the DVC isn't, which is a shame!
My interface will recieve dmx in, however the DVC program won't due to a software conflict.
If you're using another pc based console and wing you need to run it separate to Daslight.
I hope this helps!

Regards,
Peter Knagge
Luminous Lights

Posted: **Tue Nov 20, 2012 4:17 pm**

Hello,

got a same problem here, on tools every thing is working fine, i slide my fader and i see a signal coming in.

but if i use the program, and adres a fader like nothing happens, i tryed alot of things but it doenst work, i instaled the latest update of tools.

could somebody help me ?

a other problem is, that as i set fader 1 in universe 1 the input to universe 2 and out to universe 1, and then klik on adjust or ok , and i klik on it again the settings are back to default.

and a nother thing, where is the manuel for DMX-in on this forum ?

Thx