DVC2 128M with Stairville Laser
Posted: Thu Mar 24, 2011 7:35 pm
Hello, Wondering if one of you talented individuals can assist please.
I've a DVC2 128M Suidi6A with up to date firmware connected to a fairly small universe via a Win7 PC with the latest 1.6.0.0 driver.
DMX has been working correctly with all other fixtures and is terminated with 120ohms.
I added a DJ Lase 150-RGY MkII laser which doesn't work correctly. As soon as DMX is selected on the fixture (any channel) and the interface is connected, it starts stepping through automatic sequences.
Checked & changed the DMX cables and connected the device directly to the controller with the terminator but as soon as the device is connected it goes into the auto mode. Will happen with and without VC2 app running.
I suspected the laser and returned it to the supplier who agreed it may be faulty and gave me a brand new one which does exactly the same thing.
Now I'm suspecting the interface and don't have a manual controller to try. Have also tried a laptop in case the USB was an issue.
Running out of ideas. Can anyone suggest anything ?
I've a DVC2 128M Suidi6A with up to date firmware connected to a fairly small universe via a Win7 PC with the latest 1.6.0.0 driver.
DMX has been working correctly with all other fixtures and is terminated with 120ohms.
I added a DJ Lase 150-RGY MkII laser which doesn't work correctly. As soon as DMX is selected on the fixture (any channel) and the interface is connected, it starts stepping through automatic sequences.
Checked & changed the DMX cables and connected the device directly to the controller with the terminator but as soon as the device is connected it goes into the auto mode. Will happen with and without VC2 app running.
I suspected the laser and returned it to the supplier who agreed it may be faulty and gave me a brand new one which does exactly the same thing.
Now I'm suspecting the interface and don't have a manual controller to try. Have also tried a laptop in case the USB was an issue.
Running out of ideas. Can anyone suggest anything ?