Hello I work with Daslight since DVC2, DVC3 DVC4 and now with the housing DVC4 Gold ZM.
I make laser show and I use a Daslight of universe came to be controlled by software to add laser-light effects in my show.
To make it compatible with my programming of DVC3 DVC4 I want to keep like DVC3 (1 output DMX universes, universes and 2 DMX universes DMX output 3 with the housing DVC4 Gold ZM).
I can not select the universe has 2 input or must be many test by changing the output of the other universe to get there. The setting of the world does not remain in memory when closing and DVC4 of registration and must redo the settings each time you start DVC4.
I have two programmed universe in the patch.
I have the latest version of DVC4 beta and pilot DVC4 Gold ZM case is update (1.23).
I did the test on two other PC and I have the same problem. There is no setting that problem if I use the box DVC4 Gold ZM with DVC3.
universe configuration problem
-
- Posts: 18
- Joined: Sun Sep 18, 2016 5:04 pm
- Operating System: Windows
-
- Posts: 18
- Joined: Sun Sep 18, 2016 5:04 pm
- Operating System: Windows
Re: universe configuration problem
Hello
After the problem with the translator (I'm French) I summarize my problem.
I can not select the port 2 input with the universe 2.
There is also a translation problem because there (Input) instead of (Enter) in the dropdown menu.
After the problem with the translator (I'm French) I summarize my problem.
I can not select the port 2 input with the universe 2.
There is also a translation problem because there (Input) instead of (Enter) in the dropdown menu.
Re: universe configuration problem
Hi Philippe02,
You don't need to use a 2nd input universe unless you actually need more than one input universe. See the attached image for ref which may help. If you need more help you can always email [email protected] and one of the team will be able to help you in French. Kind regards
You don't need to use a 2nd input universe unless you actually need more than one input universe. See the attached image for ref which may help. If you need more help you can always email [email protected] and one of the team will be able to help you in French. Kind regards
- Attachments
-
- input.png (108.34 KiB) Viewed 12121 times
Benno
--
Product Support
--
Product Support
-
- Posts: 18
- Joined: Sun Sep 18, 2016 5:04 pm
- Operating System: Windows
Re: universe configuration problem
hi Benno
thank you for your reply
I want the universe 1 on port 1 (ok).
I want the world 1 output (ok).
I want the universe 2 on port 2 (ok).
I want input universe 2. (impossible).
universe 3 (not useful)
thank you for your reply
I want the universe 1 on port 1 (ok).
I want the world 1 output (ok).
I want the universe 2 on port 2 (ok).
I want input universe 2. (impossible).
universe 3 (not useful)
Re: universe configuration problem
Hi Philippe02, just trying to understand what you need clearly.
Port 1 (in or out)?
Port 2 (in or out)?
Port 3 (in or out?)?
Port 1 (in or out)?
Port 2 (in or out)?
Port 3 (in or out?)?
Benno
--
Product Support
--
Product Support
-
- Posts: 18
- Joined: Sun Sep 18, 2016 5:04 pm
- Operating System: Windows
Re: universe configuration problem
hello Benno.
Thank you for your reply.
I want to achieve the same configuration as in DVC3.
thank you
cordially
Thank you for your reply.
I want to achieve the same configuration as in DVC3.
thank you
cordially
-
- Posts: 18
- Joined: Sun Sep 18, 2016 5:04 pm
- Operating System: Windows
Re: universe configuration problem
It's not necessary to select universe 2 as a input in the software preferences as you're only using 1 universe input. You could just map the DMX input to universe 1 on the fader and it will work. Having said that if you download the new Beta (11/10/2016) using the link below you will be able to change the settings as you wish. Hope that helps.
www.daslight.com/download.htm
www.daslight.com/download.htm
Benno
--
Product Support
--
Product Support
-
- Posts: 18
- Joined: Sun Sep 18, 2016 5:04 pm
- Operating System: Windows
Re: universe configuration problem
Hello Benno.
Thank you for your reply.
This works correctly in the latest beta version.
The parameters remain well in memory. For cons, I have to redo the settings if I restart the PC.
Is it possible to improve this in the next version?
thanks a lot for your help.
Cordially
Thank you for your reply.
This works correctly in the latest beta version.
The parameters remain well in memory. For cons, I have to redo the settings if I restart the PC.
Is it possible to improve this in the next version?
thanks a lot for your help.
Cordially