DMX signal timing - not supported error

512 in and 512 out

Moderators: TomHat, Benno, simonB

GregoryBE
Posts: 4
Joined: Sat Jan 07, 2012 4:56 pm

DMX signal timing - not supported error

Postby GregoryBE » Sun May 31, 2015 1:44 pm

Hello,

We have some fixtures that cannot process a fast dmx timing,
When I go to the hardware manager and try to change the setting to slow, the following error pop ups:
"An error occure while storing Dmx Timing, Functionality not supported by the device"

Screenshot dms settings
https://www.dropbox.com/s/fqui33rx73xocue/Screenshot%202015-05-31%2015.39.36.png?dl=0

Screenshot error:
https://www.dropbox.com/s/aj7tvg5mwm2kipe/Screenshot%202015-05-31%2014.58.25.png?dl=0

Thank you in advance!
Kind regards,
Greg

Benno
Posts: 534
Joined: Tue Mar 31, 2015 3:31 pm
Location: Brighton
Contact:

Postby Benno » Mon Jun 01, 2015 3:43 pm

Hi Greg,

Can I just check your using the latest version of the HardwareManager and Daslight? (Links below)

http://www.daslight.com/downloads/files/DVC3_setup.exe
http://www.dmxsoft.com/global/ftp/hardwaremanager.zip
Benno
--
Product Support

GregoryBE
Posts: 4
Joined: Sat Jan 07, 2012 4:56 pm

Postby GregoryBE » Sat Jun 13, 2015 5:08 pm

I did Install the latest daslight from the website. Even tried installing it on another clean PC. Didn't work
The problem seems be gone for now, for no reason, just disconnected and connected a lot.
Saved the hardware manager link so I can test it out in the future, if the problem would occur again.

Thank you for the support!
Kind regards,
Gregory


Return to “DVC3 512 / DVC2 512”

Who is online

Users browsing this forum: No registered users and 0 guests