Beta 11 - My bugs list

[TomHat]

Hey PolDavril,

As usual, thanks for reporting. Know that we are working hard on fixing all of those bugs.
Just a quick precision on [117] : at we speak, generated scenes are created in the group selected in Edit mode. Basically, you could select whichever group in live mode, it won't change the group generated scenes get sent to. This should be fixed in next version.

Regards,

[PolDavril]

Thanks TomHat.

(119)
BUG. Map to MIDI in for faders. The notation for multiple channels does not work correctly.
Example, at the bottom of the dialog for the outputs, 1.8 will affect the channels 1 thru 7 only.
The count is not correct : it processes n-1 channels.
Other example: 1+5+8.12+15.18 : channels 12 and 18 are missing.
Same issue for DMX mapping.

[PolDavril]

(103 cont'd)
About the unwanted micro symbol (µ). I can reproduce the issue. Check the files included in this zip archive.
a) Close and reopen Daslight
b) Load the file Test_Beta11_MicroSymbol1.dvc
c) Immediately load the file Test_Beta11_MicroSymbol2.dvc (reply "No" to "Save the changes ?"
d) You should see the unwanted µ symbol on the 4th channel.
I can reproduce this issue each time I do these actions.
Maybe you can trace the application to see what's wrong.

[PolDavril]

(103 cont'd-2)
Here is another way to reproduce the Micro issue (µ symbol).
Open the attached show file (remove ".zip"). Go to the General tab and to the PATCH window. Move the fixture from the channel 5 to channel 1.
The µ symbols remain in channels 6 and 8 (the former micro channels for pan and tilt).
Obviously, init's are missing for the µ symbols.
As reported before, this issue happens when a new file is loaded also.

[TomHat]

Hey PolDavril,

Ahhh that's good news, we could fix [Bug 103] in no time with that clever test
Many thanks !

Regards,

[PolDavril]

Hi TomHat,

Do not say "we could fix" but "we will fix"... Hey, I'm joking
Thanks.

Pol

[nhebbel]

Don't know if this is a BUG but: in EASY VIEW 3D the light beams show up for a couple seconds and then go off for a couple seconds and then come on again. Not easy to program like this. Even in the Official Version.


NIKLAS

[TomHat]

Hey nhebbel,

Thanks for the feedback, I 'm reporting this to the developers in charge of EasyView2.

@PolDavril :

Code: Select all

Do not say "we could fix" but "we will fix"

I ment "We were able to fix it in no time"

Regards,

[PolDavril]

(120)
BUG. When a blank project is created by "New" file, the previous file name is kept in the Save dialog and appears by default. It's dangerous : if we do not care and press Enter too quickly, we can replace the previous show by the new one.
When a "New" file is done, the file name should be reset to blank in the Save dialog.