Fixture movement reset without cause

ChristianB · Post by **ChristianB** » Sat Apr 04, 2015 11:55 am

Hi.
i have problem with DVC3 and can't find the answer.

Generated 4 Phantom50 movements with scene generator. After this cleaned out the color , dimmer and shutter settings. After this build only color settings dimmer open and shutter too.

Here is the Problem first i start a movement then selected a color. The first of fourth head stops movement at once. When i disable the movement and start over all works fine.

Additional Info.
No matter if i change the color of the fixtures or chose another scene with par56 rgbs.

DVC3 only Software in Demo without hardware for testing.

Any suggestions?

Benno · Post by **Benno** » Wed Apr 08, 2015 7:53 am

Hi Christian,

To be able to help you please can you send me your show file along with the name of the scene where the problem is happening I can take a look.

Also have you created any of your own SSL profiles?

Kind regards,

Ben

ChristianB · Post by **ChristianB** » Sun Apr 12, 2015 1:57 pm

As i installed dmxcontrol 3 with easyview
to compare the software the error dissapears.
Iam going to reinstall the hole system to rebuild the error.