Set starting value in the Pan & Tilt

The top of the range Daslight product, with miniSD memory and 3 DMX universes

Moderators: TomHat, simonB, Benno

giannismit
Posts: 3
Joined: Sat Sep 06, 2014 1:34 am

Set starting value in the Pan & Tilt

Postby giannismit » Thu Oct 23, 2014 8:19 am

Hello,
I have a DVC33 GOLDZM and I want all devices used in a show to start at specific places (when I have not uploaded any scene, devices have a specific location other than the default).
How can I do this?

simonB
Site Admin
Posts: 1262
Joined: Wed Dec 02, 2009 3:57 pm

Postby simonB » Fri Oct 31, 2014 9:46 am

Hi There

I'm not sure I understand the question well. You want to make a stand alone scene with your lights in a specific place?

giannismit
Posts: 3
Joined: Sat Sep 06, 2014 1:34 am

Postby giannismit » Mon Nov 03, 2014 10:12 pm

Although my English is bad, I will try to describe two problems.

    1. When I do not have any loading Scene the pan and tilt values are: Χ=0 Υ=0 μX=0 μY=0.
    I want to have each device specific location:
    device-1 X=60 Y=49 μX=120 μY= 130.
    device-2 X=80 Y=58 μX=10= μY=40.
    device-3 .......
    (Τhat is possible to vary the default values ​​of pan and tilt for each device).

    2. How can I have a few positions and I call when I need them at some Scene.

stardustgr
Posts: 88
Joined: Mon Jul 28, 2008 9:26 am
Location: GREECE

Postby stardustgr » Fri Feb 27, 2015 2:43 am

hi
the only way to do that in das light is by making a group with blind move
what i mean u will make a group of scenes that the only thing u going to put inside is pan and tilt from ur moving heads and in other group u will put color gobo lamp on and what ever u want. thats the only way that i have found .

domepate
Posts: 2
Joined: Wed Jun 06, 2018 12:31 pm

Re: Set starting value in the Pan & Tilt

Postby domepate » Sat Sep 22, 2018 9:53 pm

Hello I have the dvc 4 gold lying around 1 year already. The problem I am with
this software has this is my default values pan tilt for the scanners are not taken over
this means that the scanners always start at 0.0. That would have to be gotten under control.
What is this setting in the device library for?

TomHat
Posts: 532
Joined: Tue Feb 23, 2016 9:11 am
Location: France
Contact:

Re: Set starting value in the Pan & Tilt

Postby TomHat » Wed Sep 26, 2018 7:25 am

Hello,

I am not sure what you mean by "default values pan tilt for the scanners are not taken over". In Daslight4, Pan/Tilt default values don't exist. At best, you could call "default values" :
- values = 0.0 (is the starting state)
- values = 127.127 (is the default "centered" state)

Our fixture profile files do not contain any "default values" for pan/tilt.

I hope I understood your question properly. If not, please feel free to explain with more details.

Regards,
TomHat
--
Daslight Support

Mail : france@daslight.com
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500


Return to “DVC4 GZM / DVC3 GZM / DVC2 GZM”

Who is online

Users browsing this forum: No registered users and 2 guests