Hello,
I have a request for a new feature / change in Daslight.
I would like to control some channels permanently via DMX-In. I can assign a channel from my DMX-In to a single or multiple channels in Daslight. Thats very good.
But if I click one of the three "Reset" buttons, also the setting for DMX-In on that channel gets lost. For some people this may be very helpful, but I would like to keep the DMX-In setting for the channel and reset only LTP and HTP.
In my opinion it would be a nice feature to have a general setting for the channel reset mode: "Reset all channel modes to Auto / Off" and "Reset only HTP and LTP to Auto / Off".
I think this is the same with MIDI.
Kind regards,
the-hubmaster
Feature request: Channel permanently controlled via DMX-In
-
- Posts: 60
- Joined: Sun Mar 25, 2012 1:52 pm
-
- Posts: 59
- Joined: Tue Nov 11, 2008 4:33 am
-
- Posts: 60
- Joined: Sun Mar 25, 2012 1:52 pm
I am a little bit angry...
You have changed this feature back, so the DMX IN configuration for a channel is lost, when i "reset all live actions"! Too bad, I had to realise this during a show!
Please correct this, or let the user choose whether the DMX-In should be reseted or not.
I need this as soon as possible!
the-hubmaster
You have changed this feature back, so the DMX IN configuration for a channel is lost, when i "reset all live actions"! Too bad, I had to realise this during a show!
Please correct this, or let the user choose whether the DMX-In should be reseted or not.
I need this as soon as possible!
the-hubmaster
-
- Posts: 60
- Joined: Sun Mar 25, 2012 1:52 pm
-
- Posts: 59
- Joined: Tue Nov 11, 2008 4:33 am