Hi All,
I have searched the forum but I'm unable to find a definitive answer to this.
Also, I'm fairly new to MIDI controllers, but having spent a week or two fiddling with my BCF2000, I feel relatively confident in programming it with BC Manager.
I'm more than happy triggering scenes currently, pressing any button will trigger a scene, and press again to stop it. However at the moment, because the buttons are all set up as momentary (toggle off) the lights on the buttons will not stay on when the scene is active (they will only stay on when they are being pushed).
Now I understand why this is happening, but I was wondering if there was any way I could have it so the MIDI controller button lights stay on when the scene is triggered, and go off when it is stopped. I have tried setting the buttons to Latching (Toggle On), which keeps the light on, however when I press the button again to release the scene, of course it doesn't stop it because it not sending another signal.
Any ideas how I can program the buttons so the scene will run when button pressed, the light on the button will stay on, then the scene will stopped when button pressed, and light on button will turn off?
Many thanks.
Toby
How to Get MIDI (BCF2000) to Toggle Properly
-
- Posts: 2
- Joined: Mon Feb 04, 2013 5:33 pm
-
- Posts: 463
- Joined: Fri Jul 11, 2008 10:30 am
- Location: Orlando. Florida
- Contact:
-
- Posts: 2
- Joined: Mon Feb 04, 2013 5:33 pm