Hello!
Im going to use this MH this weekend, but when I add it to the patching, and see it in 3d view, i only get the color RED no matter how much i try to change it.
And whats the differens between "standard mode" and "vector mode"?
I need a quick answer! =)
Clay Paky Alpha Wash 700
Did you create an own fixture or did you use one out of the library?
If it's an own one, check your settings of the color wheel.
How did you inserted the RGB/CMY then?
Standard mode is the "classic" mode. If you change for example the pan position it drives there. It has just 18 channels.
Vector mode calculates the moving vector and moves there with an assigned time (channels 19-21).
For more details of the dmx channels browse the manual.
Don't forget: it doesn't matter what the 3d view say. It's not the dmx output!
If it's an own one, check your settings of the color wheel.
How did you inserted the RGB/CMY then?
Standard mode is the "classic" mode. If you change for example the pan position it drives there. It has just 18 channels.
Vector mode calculates the moving vector and moves there with an assigned time (channels 19-21).
For more details of the dmx channels browse the manual.
Don't forget: it doesn't matter what the 3d view say. It's not the dmx output!
Tschalk
Germany - NRW
Club: small town party room, av. 30-50 people
Controller: DVC3-512 on Win7x64
Germany - NRW
Club: small town party room, av. 30-50 people
Controller: DVC3-512 on Win7x64