Firmware Update 1.08
-
- Posts: 9
- Joined: Thu May 06, 2010 2:54 pm
- Location: Andernach, Germany
Firmware Update 1.08
Hi,
I have read in the topic Gentlemen, need help IMMEDIATELY! and I have the same problem.
My interface is a DVC2 GOLD SIUDI8A with firmware 1.07 . Now I have installed DVC2 from the 11/10/2011 and I have to update the firmware to 1.08 . So I start the Tools.exe and try the firmware update button. It starts well, but then the interface is disconnected by the tools.exe and after this the programm returns with the message I have to update the firmware. I can not update to 1.08 . The new tools.exe from Simon I have already tryed, but it works even not.
My operating system is Windows 7 64bit. I have tried it even on a Windows XP 32bit.
Please can you help me?
Sincerely,
Florian
I have read in the topic Gentlemen, need help IMMEDIATELY! and I have the same problem.
My interface is a DVC2 GOLD SIUDI8A with firmware 1.07 . Now I have installed DVC2 from the 11/10/2011 and I have to update the firmware to 1.08 . So I start the Tools.exe and try the firmware update button. It starts well, but then the interface is disconnected by the tools.exe and after this the programm returns with the message I have to update the firmware. I can not update to 1.08 . The new tools.exe from Simon I have already tryed, but it works even not.
My operating system is Windows 7 64bit. I have tried it even on a Windows XP 32bit.
Please can you help me?
Sincerely,
Florian
-
- Posts: 9
- Joined: Thu May 06, 2010 2:54 pm
- Location: Andernach, Germany
-
- Posts: 9
- Joined: Thu May 06, 2010 2:54 pm
- Location: Andernach, Germany
Hi,
I am sorry, but with the new Version of DVC2 (08/11/2011) my problem with updating the firmware is not solved.
When I click in tools.exe on "firmware update"-button on my interface is displayed 88, then 01 and after a few seconds it displays PC and the firmware update is failed.
I know that I am annoying you, but my last DVC2 Beta that runs is from 06/09/2011.
Florian
I am sorry, but with the new Version of DVC2 (08/11/2011) my problem with updating the firmware is not solved.
When I click in tools.exe on "firmware update"-button on my interface is displayed 88, then 01 and after a few seconds it displays PC and the firmware update is failed.
I know that I am annoying you, but my last DVC2 Beta that runs is from 06/09/2011.
Florian
-
- Posts: 4
- Joined: Sat Aug 14, 2010 10:12 am
- Location: Tours, France
The only thing I have gotten to work was a computer restore. UNFORTUNATELY! If you restore your computer to a point before you attempted the upgrade it should work. My unit has been working as usual, after I did a restore. Hope it helps, :-\ All I can offer.
Sincerely,
Miles A. Kieft
Technical Engineer
Club Envy
441 W. Western Ave.
Muskegon, MI. 49440
www.ClubEnvyMuskegon.com
Miles A. Kieft
Technical Engineer
Club Envy
441 W. Western Ave.
Muskegon, MI. 49440
www.ClubEnvyMuskegon.com
-
- Posts: 9
- Joined: Thu May 06, 2010 2:54 pm
- Location: Andernach, Germany
-
- Posts: 4
- Joined: Sat Aug 14, 2010 10:12 am
- Location: Tours, France
Simon, I'm still having the same issue. running XP. I d/led the latest and still does not detect interface. would it be necessary to completely uninstall first? I will be calling tech support later today. anychance you can walk through it with me when I call?
Sincerely,
Miles A. Kieft
Technical Engineer
Club Envy
441 W. Western Ave.
Muskegon, MI. 49440
www.ClubEnvyMuskegon.com
Miles A. Kieft
Technical Engineer
Club Envy
441 W. Western Ave.
Muskegon, MI. 49440
www.ClubEnvyMuskegon.com
FIX
Call adessa @ Daslight Support! She is AMAZING to deal with! She remotely connected and trouble shot. within half an hour It was handled. I am sending my unit in for a replacement. her number is 407-452-2539. [/list][/code]
Sincerely,
Miles A. Kieft
Technical Engineer
Club Envy
441 W. Western Ave.
Muskegon, MI. 49440
www.ClubEnvyMuskegon.com
Miles A. Kieft
Technical Engineer
Club Envy
441 W. Western Ave.
Muskegon, MI. 49440
www.ClubEnvyMuskegon.com
It seems that we have found a potential problem when updating the firmware from 1.07 which was shipped with the December 2010 release of DVC2.
A solution is to start your interface in "bootloader mode". To do this, the 8 ports on the left need to be bridged. If you do not have a wire or socket capable of doing this, you can use a ball of tin foil. Start the tools application and you will just see the interface and firmware tabs. Write the firmware, remove the ball of foil and reset the interface, then write the firmware again.
A solution is to start your interface in "bootloader mode". To do this, the 8 ports on the left need to be bridged. If you do not have a wire or socket capable of doing this, you can use a ball of tin foil. Start the tools application and you will just see the interface and firmware tabs. Write the firmware, remove the ball of foil and reset the interface, then write the firmware again.
Last edited by simonB on Wed Nov 30, 2011 11:06 am, edited 1 time in total.
-
- Posts: 9
- Joined: Thu May 06, 2010 2:54 pm
- Location: Andernach, Germany
Re: Firmware Update 1.08
sorry , i can´t see images ..,,repost please!!! i have error too!
Re: Firmware Update 1.08
Can you post the images? I have the same problem.
Thank you
Thank you