Showtec Led powerbar 24
Showtec Led powerbar 24
I'll try in this fòrum. Does anybody know how can I control a showtec Led powerbar 24 with daslight? I have tried with many fixture and Ive tried to do my own library but I'm not able to do it. When I check with hardware manager, with DMX in, all the bars get sync, but when I try to control them its impossible. Thank you
Re: Showtec Led powerbar 24
Hey,
Have you tried using this SSL file ?
https://store.daslight.com/downloadSpecificSSL/36609
Hope this helps.
Regards,
Have you tried using this SSL file ?
https://store.daslight.com/downloadSpecificSSL/36609
Hope this helps.
Regards,
TomHat
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
Re: Showtec Led powerbar 24
Thank you very much for your answer. I'll try this afternoon and I tell you if it works.
Re: Showtec Led powerbar 24
Unfortunately, it still does not work.
Re: Showtec Led powerbar 24
Hey,
Did you get the address right in Daslight ?
Also, you should be able to use Daslight4 without the SSL file, just edit the faders as you would in Hardware Manager.
If it still doesn't work, it could be that the interface you're using isn't compatible with Daslight4. What interface model are you using ?
Regards,
Did you get the address right in Daslight ?
Also, you should be able to use Daslight4 without the SSL file, just edit the faders as you would in Hardware Manager.
If it still doesn't work, it could be that the interface you're using isn't compatible with Daslight4. What interface model are you using ?
Regards,
TomHat
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500