DVC2 512 IP
-
- Posts: 6
- Joined: Wed Nov 11, 2009 8:17 pm
DVC2 512 IP
Maby not the right part of the forum... But I hope anyone can answer a little fast...
Im looking at the IP version of DVC2....
Have anyone bought it?
Works good?
Works with a Twisted cable straight into a PC...
Works with a WLAN and a LapTop?
Please answer fast because of an order is on the way...
Im looking at the IP version of DVC2....
Have anyone bought it?
Works good?
Works with a Twisted cable straight into a PC...
Works with a WLAN and a LapTop?
Please answer fast because of an order is on the way...
I think you should have done some home work and looked through the forum. I don't think it's working properly yet. Someone has one and the software does not detect the interface and has said he has to wait for some software for it !!!!!!!.
I think you need to use a "twisted cable" crossover cable if connected direct to the laptop/computer, otherwise on a hub/switch on a LAN. If that LAN is a WLAN that should also work.
Take a look at the Sunlite manuals, same hardware but has code in them to stop working with other software, i.e. Sunlite interfaces work with the Sunlite software and the Daslight interfaces work with the Daslight software and not vice versa.
http://www.dmxsoft.com/manuals/?oem=SUNLITE&na=gY7
is the web address and then take the "SIUDI IP1 (2004 ETHERNET-DMX interface)" link on the left hand panel. SHould give you more info.
I think you need to use a "twisted cable" crossover cable if connected direct to the laptop/computer, otherwise on a hub/switch on a LAN. If that LAN is a WLAN that should also work.
Take a look at the Sunlite manuals, same hardware but has code in them to stop working with other software, i.e. Sunlite interfaces work with the Sunlite software and the Daslight interfaces work with the Daslight software and not vice versa.
http://www.dmxsoft.com/manuals/?oem=SUNLITE&na=gY7
is the web address and then take the "SIUDI IP1 (2004 ETHERNET-DMX interface)" link on the left hand panel. SHould give you more info.
Andre
-
- Posts: 6
- Joined: Wed Nov 11, 2009 8:17 pm
Deejay_Bamse wrote:Yes I have read about that on the forum.. But that was almost the only thing I found about it... Is it that NEW?
It is for Daslight but has been with Sunlite for a while.
I am still not sure if the software to do the IP address change etc. is available for the Daslight version. It might be that you get it when you purchase the interface, but I would definately check first if you can get hold of someone from Daslight.
Andre
DVC2 IP 512 Interface
Welcome to the forum.
Thank you for sharing the Daslight Company line about the discontinuance of the IP Interface. If this were true, I would still have the Daslight IP Interface. However, the problems encountered were more significant than simply being similar to the Sunlite Interface.
I look forward to more candid information in the future.
Best Regards.
Thank you for sharing the Daslight Company line about the discontinuance of the IP Interface. If this were true, I would still have the Daslight IP Interface. However, the problems encountered were more significant than simply being similar to the Sunlite Interface.
I look forward to more candid information in the future.
Best Regards.
-
- Posts: 463
- Joined: Fri Jul 11, 2008 10:30 am
- Location: Orlando. Florida
- Contact:
I can't quite remember what the exact specs were for the Daslight IP.
The main use for the Sunlite EasyStandAlone IP interface is to update the internal memory over IP. So if you have an install at the other end of the country (or over in another continent if you do international projects) and the bar manager calls you up and says he needs some modifications to be made, you can send your showfile over the internet and write directly to the interface.
The second use is as an art-net to DMX converter. Once you're sending DMX over ethernet, you have a variety of advantages.
Ethernet gear is generally cheaper than DMX gear, i.e repeaters, splitters etc...
Better data integrity (it is designed for more complex data packets than DMX)
You can pass up to 40 universes (well, 30 reliably) down one ethernet line.
So basically, say you have a bar with 6 rooms and a hell of a lot of lights, you could take 6 universes out of your computer, pass this through a router, disperse it out to 6 different locations, then attach 6 IP interfaces to convert back to DMX.
The main use for the Sunlite EasyStandAlone IP interface is to update the internal memory over IP. So if you have an install at the other end of the country (or over in another continent if you do international projects) and the bar manager calls you up and says he needs some modifications to be made, you can send your showfile over the internet and write directly to the interface.
The second use is as an art-net to DMX converter. Once you're sending DMX over ethernet, you have a variety of advantages.
Ethernet gear is generally cheaper than DMX gear, i.e repeaters, splitters etc...
Better data integrity (it is designed for more complex data packets than DMX)
You can pass up to 40 universes (well, 30 reliably) down one ethernet line.
So basically, say you have a bar with 6 rooms and a hell of a lot of lights, you could take 6 universes out of your computer, pass this through a router, disperse it out to 6 different locations, then attach 6 IP interfaces to convert back to DMX.
IP Interface Performance
Just an additional comment on the question of choosing an IP Interface.
My reason for selecting the IP Interface (Ethernet) over a USB version had to do with the system differences I anticipated encountering:
1. OPERATING SYSTEMS. I have a Laptop using Vista Premium Home Edition 64 Bit operating system as well as Computers using Vista Basic Home Edition and Windows XP Service Pack 3 operating system, both 32 Bit operating systems. With the IP Interface resident on a local area network, any of the operating systems could address the IP Interface.
2. WIRELESS LAN. With the IP Interface, the use of a Wireless LAN could be accommodated. As noted a Virtual Private Network (VPN) would permit access via the internet from locations other than the local theater or office. and
3. ADDITIONAL CAPACITY. The IP Interface provides a less expensive interface as our need for multiple lighting control interfaces grew.
Trust this is of assistance.
My reason for selecting the IP Interface (Ethernet) over a USB version had to do with the system differences I anticipated encountering:
1. OPERATING SYSTEMS. I have a Laptop using Vista Premium Home Edition 64 Bit operating system as well as Computers using Vista Basic Home Edition and Windows XP Service Pack 3 operating system, both 32 Bit operating systems. With the IP Interface resident on a local area network, any of the operating systems could address the IP Interface.
2. WIRELESS LAN. With the IP Interface, the use of a Wireless LAN could be accommodated. As noted a Virtual Private Network (VPN) would permit access via the internet from locations other than the local theater or office. and
3. ADDITIONAL CAPACITY. The IP Interface provides a less expensive interface as our need for multiple lighting control interfaces grew.
Trust this is of assistance.