Hi,
I can patch a Led8 fixture correctly and fixture icon are selectable. Then I add 2 RGB fixtures and Led8 fixture icon are automatically disabled. Unable to select Led8 fixture. I tried to close / restart the software but it causes another problem, all Led8 palettes disappears except color.
For now, I can't find out how to use this soft with my fixtures
Any workaround for this ? Is this a known issue ?
Regards
PROBLEM - Disabled fixture icon while patching
-
- Posts: 61
- Joined: Sat Jul 02, 2016 12:43 pm
- Operating System: Windows
- Location: Germany
Re: PROBLEM - Disabled fixture icon while patching
Hi HK,
I hope I understood your problem correctly.
If you patch different fixtures, dashlight opens different fixture groups! ( see image: 1 and 2).
The aktive fixture group highlights the aktive fixture/s. The other group/s are dimmend.
To aktivate the dimmend fixtures you have to select the assosiated fixture group.
To have all fixtures aktive/highlighted you have to select the general group tap.
Hope this helps
Thomas
I hope I understood your problem correctly.
If you patch different fixtures, dashlight opens different fixture groups! ( see image: 1 and 2).
The aktive fixture group highlights the aktive fixture/s. The other group/s are dimmend.
To aktivate the dimmend fixtures you have to select the assosiated fixture group.
To have all fixtures aktive/highlighted you have to select the general group tap.
Hope this helps
Thomas