Problem with showtec LED Powerbar 24
Posted: Mon Jul 23, 2018 9:56 pm
Hello first I wanted to apologize for my English, but I hope you understand what I want to expose. I have a team of lights on a boat, controlled by the daslight 4, which consists of 7 Beam heads 201, 4 pr lighting spotlights model xpar 348_pr, 2 fog machines Mark MF 1500 DMX, and 6 LED bars from showtec, LED Powerbar 24. Well, I had everything configured before installing the 6 bars and everything worked perfectly. When I add the 6 bars, in the daslight I can not find this model in the library, and I have tried with the RGB of 3 channels that there is in the section of Genèric, as well as any luminary that could look like. I have also created my own library with all the data of the bars, and nothing. I can not control them from the Daslight. When I start the software or when I start the Hardware Manager the 24 LEDs are on and there is no way to react, but on the other hand I can control the rest of the team. I'm not sure if it is in this section where you should post this question, but I would greatly appreciate it if you could give me some advice because right now I do not know where to continue. Thank you very much in advance.