Fader control

Previous Daslight version. Can manage up to 6 DMX universes depending on the hardware connected

Moderators: TomHat, Benno, simonB

sparkymarkyracing
Posts: 14
Joined: Fri Mar 07, 2008 6:41 pm

Fader control

Postby sparkymarkyracing » Sun Jul 24, 2011 8:57 pm

Hi Guys, Can anyone help, can i use an external desk (midi or dmx ) to control the faders while i program, (so instead of using the mouse and the faders on the screen i use the external interface)

Thanks Mark.

simonB
Site Admin
Posts: 1262
Joined: Wed Dec 02, 2009 3:57 pm

Postby simonB » Mon Jul 25, 2011 2:16 pm

Hi Mark

It is possible to patch a DMX input fader to an output fader. It is also possible to patch a MIDI message to an output fader, activate a scene, change the speed of a scene and a few other options. More info here:
http://www.daslight.com/online_manuals/ ... dfPJk8.htm

Richard CSL
Posts: 462
Joined: Fri Jul 11, 2008 10:30 am
Location: Orlando. Florida
Contact:

Postby Richard CSL » Mon Aug 15, 2011 9:12 am

no it is not possible, because once a channel slider has been assigned either to midi or DMX in, it is in override or HTP only mode, so for programming it is not going to work.

As Simon says DMX in or Midi in can be used to control scene speed faders, or even to activate scenes, but channels linked to control can be set up for recording scenes but then afterwards you will need to disconnect the slider from control and re introduce auto green button mode for the channel.

hope this helps, better than a one liine answer.
Music sets the mood Lighting sets the ambience


Return to “Virtual Controller 2”

Who is online

Users browsing this forum: No registered users and 3 guests