For example, if I have a "fade chase" with my movers programmed to a scene, so that when I activate the scene the movers intensity fade in and out, etc.. But when I have the shutter/dimmer channel set to a midi fader, the scene will not work. I assume because the original programming of the shutter/dimmer channel is being overridden by the midi setting?
Is there any way to fix this? Any help is greatly appreciated, Thanks!
Scene not working when channel is midi patched..
-
AoS Lighting
- Posts: 76
- Joined: Mon Feb 23, 2009 10:04 pm
- Contact:
Hi
In DVC2, if a channel is set to MIDI control, it will ignore all scene values for the channel (however other channels included in the scene which are not assigned to a MIDI command should work as normal).
In DVC3, this works in LTP mode. If a channel is set to MIDI and a scene is triggered, the scene will override the MIDI command unless the channel was originally set to OFF in the scene.
In DVC2, if a channel is set to MIDI control, it will ignore all scene values for the channel (however other channels included in the scene which are not assigned to a MIDI command should work as normal).
In DVC3, this works in LTP mode. If a channel is set to MIDI and a scene is triggered, the scene will override the MIDI command unless the channel was originally set to OFF in the scene.
-
AoS Lighting
- Posts: 76
- Joined: Mon Feb 23, 2009 10:04 pm
- Contact: