Dmx Board
Dmx Board
I have a showtec showmaster 48mkii and a Dvc4 Gold, i wish to control the lights on the digital board with the dmx board i own, is there a way to do this? The software will detect my board(in the hardware manager) and it can read the values it is outputing(in the hardware manager) but i can not figure out how to control the lights with it. Any fixes?
-
- Posts: 47
- Joined: Sat May 18, 2019 3:46 am
- Operating System: Windows
- Location: North Carolina, USA
- Contact:
Re: Dmx Board
when you say it detects it...does it detect the MIDI commands? Using the MIDI watcher (that's built-in) do you see values changing when you interact with the board?
Re: Dmx Board
I only have a dmx board so no, in (hardware manager, dmx input/output t, universe 2 , dmx in) i can see the board and the fader values.
Re: Dmx Board
Hello,
In order for the software to take in DMX input, it has to go through your interface's XLR port. This feature is only available for some interfaces, so please make sure your interface shows more than one XLR port.
You can set your second XLR port as a DMX input via the "preferences" window of your Daslight4 software.
Hope this helps.
Best regards,
In order for the software to take in DMX input, it has to go through your interface's XLR port. This feature is only available for some interfaces, so please make sure your interface shows more than one XLR port.
You can set your second XLR port as a DMX input via the "preferences" window of your Daslight4 software.
Hope this helps.
Best regards,
TomHat
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
--
Daslight Support
Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
Re: Dmx Board
The ports are detected, first port- output, universe 1. Second port- input , input 1
Re: Dmx Board
Still no luck
-
- Posts: 69
- Joined: Fri Oct 14, 2016 10:48 am
- Operating System: Mac OS X
- Location: Moldova Tiraspol
Re: Dmx Board
the settings for controlling the dimmer are done as follows: Select] the right mouse button on the fader that we want to assign, select "Edit DMX Mapping " then configure the INPUT - the same number as in the DVCgold settings, then select the channel number WHICH the fader will control.
- Attachments
-
- 1.png (86.18 KiB) Viewed 7053 times
-
- 2.png (167.89 KiB) Viewed 7053 times