when I change a dimming-value manually it is set as new value unsing LTP as it should. If I start a fading-process (new Scene) on that channel, the value is faded properly, but after the fade-in of the Scene the value jumps back to the last manual value instead of keeping the dimming-value as new LTP.
Therefore you cant adjust any value while the Show is running without ruining the whole further Show! Adjusting a single channel within a running Show can result in immediate Brightness-Changes from 0 to 100% later in the show, that blind everyone if you dimmed that channel manually (we are using 10 kW LED Power)...
It seems that different midi-mappings corrupted the dvc-file, because after deleting and reassigning all midi-controls of the same file the Problem is now different: Now there are no jumpbacks, but the manual value is not overwritten by a newly selected preset. The Manual midi-value has the effect as it is used as a htp-value. This means you have to completely pull down all changed faders to make preset-changes take effect. If you rise them again you have an immediate brightness-jump because your LTP-Midi-value starts at 0.
i cant upload files because the board tells me .dvc is an invalid Extension. also .zip does not work.