Daslight 4 shutdown problem

The previous Daslight version

Moderators: TomHat, simonB

bassliebe93
Posts: 2
Joined: Sun Nov 11, 2018 11:22 am
Operating System: Windows

Daslight 4 shutdown problem

Post by bassliebe93 »

Hey my name is Daniel from Germany,

i'm actually use the Daslight4 in the show mode with a few led and old par spots (relay switch)

If i turn all spots off and shutdown the pc, all lights will switch back on.

Then i turn the pc back on and start Daslight..all lights off now.

i also erase the standalone scene on my interface.

The problem isn't always but sometimes :(

Sorry for my english mistakes.

Greetings

Daniel
TomHat
Posts: 1380
Joined: Tue Feb 23, 2016 9:11 am
Location: France
Contact:

Re: Daslight 4 shutdown problem

Post by TomHat »

Hello,

Please answer these 2 questions :

- I assume the interface is plugged to your PC, right ?
- Does this problem also appear when you only turn off Daslight4 ? Or is it only when you turn off the computer ?

It seems like "lights ON" is the default state of your lights, which they go back to when they stop receiving DMX signal.

Hope this helps.

Regards,
TomHat
--
Daslight Support

Mail : [email protected]
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500
bassliebe93
Posts: 2
Joined: Sun Nov 11, 2018 11:22 am
Operating System: Windows

Re: Daslight 4 shutdown problem

Post by bassliebe93 »

Thanks for the Answer!

The Interface is connected with some DMX Switchpacks. Each Switchpack have 4 Channels of 230v.
If i shutdown my Computer, a few lights (Switchpack Channels) will turn on again
Only Sometimes and always another one.
If i turn on the Computer then, all lights go off until i restart Daslight and Switch the lights back on.

So, i think the Standalone Funktion send a wrong Signal to the dmx output when the computer is down.

I hope you understand my worst english:D

Thanks alot

Daniel
Post Reply