Page 1 of 1
Showtec Led powerbar 24
Posted: Tue Jul 24, 2018 11:22 pm
by labotica
I'll try in this fòrum. Does anybody know how can I control a showtec Led powerbar 24 with daslight? I have tried with many fixture and Ive tried to do my own library but I'm not able to do it. When I check with hardware manager, with DMX in, all the bars get sync, but when I try to control them its impossible. Thank you
Re: Showtec Led powerbar 24
Posted: Thu Jul 26, 2018 2:37 pm
by TomHat
Hey,
Have you tried using this SSL file ?
https://store.daslight.com/downloadSpecificSSL/36609Hope this helps.
Regards,
Re: Showtec Led powerbar 24
Posted: Thu Jul 26, 2018 4:27 pm
by labotica
Thank you very much for your answer. I'll try this afternoon and I tell you if it works.
Re: Showtec Led powerbar 24
Posted: Fri Jul 27, 2018 6:59 pm
by labotica
Unfortunately, it still does not work.
Re: Showtec Led powerbar 24
Posted: Mon Jul 30, 2018 7:27 am
by TomHat
Hey,
Did you get the address right in Daslight ?
Also, you should be able to use Daslight4 without the SSL file, just edit the faders as you would in Hardware Manager.
If it still doesn't work, it could be that the interface you're using isn't compatible with Daslight4. What interface model are you using ?
Regards,