Showtec Led powerbar 24

The new Daslight - for PC and Mac

Moderators: TomHat, simonB, Benno

labotica
Posts: 5
Joined: Wed Jul 04, 2018 1:15 pm
Operating System: Windows

Showtec Led powerbar 24

Postby labotica » Tue Jul 24, 2018 11:22 pm

I'll try in this fòrum. Does anybody know how can I control a showtec Led powerbar 24 with daslight? I have tried with many fixture and Ive tried to do my own library but I'm not able to do it. When I check with hardware manager, with DMX in, all the bars get sync, but when I try to control them its impossible. Thank you

TomHat
Posts: 546
Joined: Tue Feb 23, 2016 9:11 am
Location: France
Contact:

Re: Showtec Led powerbar 24

Postby TomHat » Thu Jul 26, 2018 2:37 pm

Hey,

Have you tried using this SSL file ?
https://store.daslight.com/downloadSpecificSSL/36609

Hope this helps.

Regards,
TomHat
--
Daslight Support

Mail : france@daslight.com
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500

labotica
Posts: 5
Joined: Wed Jul 04, 2018 1:15 pm
Operating System: Windows

Re: Showtec Led powerbar 24

Postby labotica » Thu Jul 26, 2018 4:27 pm

Thank you very much for your answer. I'll try this afternoon and I tell you if it works.

labotica
Posts: 5
Joined: Wed Jul 04, 2018 1:15 pm
Operating System: Windows

Re: Showtec Led powerbar 24

Postby labotica » Fri Jul 27, 2018 6:59 pm

Unfortunately, it still does not work.

TomHat
Posts: 546
Joined: Tue Feb 23, 2016 9:11 am
Location: France
Contact:

Re: Showtec Led powerbar 24

Postby TomHat » Mon Jul 30, 2018 7:27 am

Hey,

Did you get the address right in Daslight ?
Also, you should be able to use Daslight4 without the SSL file, just edit the faders as you would in Hardware Manager.
If it still doesn't work, it could be that the interface you're using isn't compatible with Daslight4. What interface model are you using ?

Regards,
TomHat
--
Daslight Support

Mail : france@daslight.com
Phone (French) : +33 (0) 616 427 588
Phone (English) : +44 (0) 7 481 811 500


Return to “Daslight 4”

Who is online

Users browsing this forum: No registered users and 10 guests