Some colors or LEDs not work on screen

[daniele50]

Hello! I'm trying Daslight and if it works then I'll buy the hardware (dvc4 gold).

I have FUN GENERATION PICOWASH 40 (there is the texture in Library _VARIED) and I use it in 25 channel mode.
This moving head has four LEDs RGBW.

The problem is that when I set channel 8 (red LED1), 9 (green LED1) or 10 (blue LED1) the square on the bottom right (or the lamp on the 3D viewer) remains dark.
The same happens with the red, green and blue colors of the LEDs 2 and 3 (channel 12, 13, 14, 16, 17 and 18).

With channels 11 (white LED1), 15 (white LED2) and 19 (white LED3) it works (the square on the bottom right becomes white).

Even with channels 20 (red LED4), 21 (green LED4), 22 (blue LED4) and 23 (white LED4) it works (the square on the bottom right becomes colored).

Can someone help me?

[daniele50]

There was only one beam, I set 4 beams and now it works!
Bye