Midi Mapping on Fader not saved when restart the software
Posted: Thu Apr 20, 2017 1:32 am
Hi,
First question...
I'm using actually the Beta version April 10, 2017 - 17.410.8028.1204. I'm on Windows 7 64 bits with DVC4 Gold device. I'm using the MIDI AKAI APC20 Professional Ableton Controller to trigger the software.
I assign push button to scenes (Everything is working perfectly). I can save the file, close Daslight and reopen it and everything is working again. But, when I assign fader (channel from fixture) to a midi fader, during the session (during the time I let Daslight opened), I can control the fader (example, Dimmer of a fixture). I save the file and close Daslight. When I reopen it, all the MIDI mapping to all the fader are gone. I've to reconfigure all the fader channel to the MIDI fader again.
The bug occur for any channel assign to fader. I can assign Shutter, Dimmer, Color, anything... As soon as I close Daslight (even if I save the file before with all setting perfectly working), when I reopen the software, all the MIDI mapping are gone.
Does anybody have an idea of what's happen or what I do of wrong ?
Second question...
Is there a possibility of conflict with the following case. I'm want to use 1 MIDI fader to control 2 channels of 2 fixtures, 1 with the « Full Range Triggering » and the other without the « Full Range Triggering ». On the DMX channel of the first fixture, the value range is between 0 to 255 (DMX) and on the other fixture, the value range is between 125 to 150 (DMX). When I use that setup (1 slider fader on my MIDI device to control 2 DMX Channel inside Daslight), some time, I lose the setting of the second fixture. For I don't know witch raison, the value (DMX) of the second channel goes down, like between 0 and 25. (It's like if the value shift down to the previoux group of value).
If you have idea on this too, It will be very appreciated !
Thanks for your help and your great software ! (Very satisfied)
First question...
I'm using actually the Beta version April 10, 2017 - 17.410.8028.1204. I'm on Windows 7 64 bits with DVC4 Gold device. I'm using the MIDI AKAI APC20 Professional Ableton Controller to trigger the software.
I assign push button to scenes (Everything is working perfectly). I can save the file, close Daslight and reopen it and everything is working again. But, when I assign fader (channel from fixture) to a midi fader, during the session (during the time I let Daslight opened), I can control the fader (example, Dimmer of a fixture). I save the file and close Daslight. When I reopen it, all the MIDI mapping to all the fader are gone. I've to reconfigure all the fader channel to the MIDI fader again.
The bug occur for any channel assign to fader. I can assign Shutter, Dimmer, Color, anything... As soon as I close Daslight (even if I save the file before with all setting perfectly working), when I reopen the software, all the MIDI mapping are gone.
Does anybody have an idea of what's happen or what I do of wrong ?
Second question...
Is there a possibility of conflict with the following case. I'm want to use 1 MIDI fader to control 2 channels of 2 fixtures, 1 with the « Full Range Triggering » and the other without the « Full Range Triggering ». On the DMX channel of the first fixture, the value range is between 0 to 255 (DMX) and on the other fixture, the value range is between 125 to 150 (DMX). When I use that setup (1 slider fader on my MIDI device to control 2 DMX Channel inside Daslight), some time, I lose the setting of the second fixture. For I don't know witch raison, the value (DMX) of the second channel goes down, like between 0 and 25. (It's like if the value shift down to the previoux group of value).
If you have idea on this too, It will be very appreciated !
Thanks for your help and your great software ! (Very satisfied)