Beta 9 - My bugs list
-
- Posts: 477
- Joined: Tue Nov 17, 2015 6:48 pm
- Operating System: Windows
- Location: Belgium
- Contact:
Re: Beta 9 - My bugs list
(61)
BUG. In EDIT, EFFECT.
See the show file attached (remove the dummy ".zip").
When generating an effect (I did "Curve"), the current step is not taken into account.
Example: the attached show file has a scene with 3 steps : step 1=Yellow, 2=Cyan, 3=Magenta.
The result is always the same : step 1=Cyan / middle steps=generated effect / last step = Magenta.
The Yellow step has gone.
This happens whatever the step selected and the state (on/off) of the "On current step" flag.
Additional question : what is "On current step" meant to do ? Replace the current step with a new sequence ? Insert a sequence before or after the current step ? Append the sequence to the end of the scene when it is off ?
BUG. In EDIT, EFFECT.
See the show file attached (remove the dummy ".zip").
When generating an effect (I did "Curve"), the current step is not taken into account.
Example: the attached show file has a scene with 3 steps : step 1=Yellow, 2=Cyan, 3=Magenta.
The result is always the same : step 1=Cyan / middle steps=generated effect / last step = Magenta.
The Yellow step has gone.
This happens whatever the step selected and the state (on/off) of the "On current step" flag.
Additional question : what is "On current step" meant to do ? Replace the current step with a new sequence ? Insert a sequence before or after the current step ? Append the sequence to the end of the scene when it is off ?
- Attachments
-
- Test_Beta9_20_EffectToCurrentStep.dvc.zip
- (9.64 KiB) Downloaded 405 times
Pol Davril
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be
-
- Posts: 477
- Joined: Tue Nov 17, 2015 6:48 pm
- Operating System: Windows
- Location: Belgium
- Contact:
Re: Beta 9 - My bugs list
(62)
BUG. For the audio file, the fade times are not properly used. For example, the parameters for the fadings are both set to 30 seconds but the actual fade in is about 10 seconds when the scene starts playing. For the fade out, when the scene is stopped, the sound volume remains a long time at the current level and the actual fade out begins much later, about 5 seconds before the end of the time.
(63)
IMPROVEMENT. It would be convenient if the path to the latest directory selected for audio files was saved in the global parameters.
BUG. For the audio file, the fade times are not properly used. For example, the parameters for the fadings are both set to 30 seconds but the actual fade in is about 10 seconds when the scene starts playing. For the fade out, when the scene is stopped, the sound volume remains a long time at the current level and the actual fade out begins much later, about 5 seconds before the end of the time.
(63)
IMPROVEMENT. It would be convenient if the path to the latest directory selected for audio files was saved in the global parameters.
Pol Davril
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be
-
- Posts: 477
- Joined: Tue Nov 17, 2015 6:48 pm
- Operating System: Windows
- Location: Belgium
- Contact:
Re: Beta 9 - My bugs list
(64)
BUG ? / IMPROVEMENT. The divider between "Effect generator" and 2D view can be moved completely to the right but not to the far left.
It would be convenient to be able to move this divider to the far left, in order to have a better view on 2D fixtures, especially when this panel is undocked and displayed on a second screen.
BUG ? / IMPROVEMENT. The divider between "Effect generator" and 2D view can be moved completely to the right but not to the far left.
It would be convenient to be able to move this divider to the far left, in order to have a better view on 2D fixtures, especially when this panel is undocked and displayed on a second screen.
- Attachments
-
- Daslight26-2DFullViewSuggestion.jpg (106.02 KiB) Viewed 11241 times
Pol Davril
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be
-
- Posts: 477
- Joined: Tue Nov 17, 2015 6:48 pm
- Operating System: Windows
- Location: Belgium
- Contact:
Re: Beta 9 - My bugs list
(65)
BUG. The 4th effect category is wrongly named "Color mixing" in the parameters, instead of "Matrix" (like anywhere else).
BUG. The 4th effect category is wrongly named "Color mixing" in the parameters, instead of "Matrix" (like anywhere else).
- Attachments
-
- Daslight27-MatrixEffectName.jpg (68.8 KiB) Viewed 11241 times
Pol Davril
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be
-
- Posts: 477
- Joined: Tue Nov 17, 2015 6:48 pm
- Operating System: Windows
- Location: Belgium
- Contact:
Re: Beta 9 - My bugs list
(66)
BUG (minor). The tooltip for Pan Tilt effect contains a slash character. Anywhere else, it's just "Pan Tilt". Ok, that's just a very minor detail but, unfortunately, I've seen it.
BUG (minor). The tooltip for Pan Tilt effect contains a slash character. Anywhere else, it's just "Pan Tilt". Ok, that's just a very minor detail but, unfortunately, I've seen it.
- Attachments
-
- Daslight28-PanTiltEffectName.jpg (61.32 KiB) Viewed 11241 times
Pol Davril
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be
-
- Posts: 477
- Joined: Tue Nov 17, 2015 6:48 pm
- Operating System: Windows
- Location: Belgium
- Contact:
Re: Beta 9 - My bugs list
(67)
BUG ? When multiple scenes are selected in EDIT mode, the Fade on/off switch can be changed but the fade values are disabled. Is this intentional or is it a bug ?
BUG ? When multiple scenes are selected in EDIT mode, the Fade on/off switch can be changed but the fade values are disabled. Is this intentional or is it a bug ?
- Attachments
-
- Daslight29-MultipleSceneFadeChange.jpg (79.6 KiB) Viewed 11241 times
Pol Davril
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be
-
- Posts: 477
- Joined: Tue Nov 17, 2015 6:48 pm
- Operating System: Windows
- Location: Belgium
- Contact:
Re: Beta 9 - My bugs list
(68)
BUG. When an effect is generated on universe 2, only 1 step is created.
The same generation on universe 1 works fine.
See the resulting show file attached (remove the dummy ".zip" extension).
BUG. When an effect is generated on universe 2, only 1 step is created.
The same generation on universe 1 works fine.
See the resulting show file attached (remove the dummy ".zip" extension).
- Attachments
-
- Test_Beta9_26_EffectUniverse2.dvc.zip
- (117.34 KiB) Downloaded 420 times
Pol Davril
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be
-
- Posts: 477
- Joined: Tue Nov 17, 2015 6:48 pm
- Operating System: Windows
- Location: Belgium
- Contact:
Re: Beta 9 - My bugs list
(69)
BUG. A Curve effect is generated. Different colors are selected for the beams, as follows :
Red 1, Green 2, Blue 3, Red 4, Green 5, Blue 6.
The preview is correct in the effect window.
However, when this effect is generated, all colors mix together for all beams.
See the bad resulting show file attached (remove the dummy ".zip" extension).
BUG. A Curve effect is generated. Different colors are selected for the beams, as follows :
Red 1, Green 2, Blue 3, Red 4, Green 5, Blue 6.
The preview is correct in the effect window.
However, when this effect is generated, all colors mix together for all beams.
See the bad resulting show file attached (remove the dummy ".zip" extension).
- Attachments
-
- Test_Beta9_27_CurveEffectColorBug.dvc.zip
- (234.67 KiB) Downloaded 430 times
Pol Davril
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be
Re: Beta 9 - My bugs list
Hi
We already fixed some of the issues, but some remains (didn't check the 69, 67 is not done either, 64 could be better and we didn't check the 62)
But we'll fix them sooner than later
We already fixed some of the issues, but some remains (didn't check the 69, 67 is not done either, 64 could be better and we didn't check the 62)
But we'll fix them sooner than later
Don't forget to mark the post as answered when you find the answer to your question
Please use the "Operating System" field in your preferences for better support
JRock
Please use the "Operating System" field in your preferences for better support
JRock
-
- Posts: 477
- Joined: Tue Nov 17, 2015 6:48 pm
- Operating System: Windows
- Location: Belgium
- Contact:
Re: Beta 9 - My bugs list
(70)
BUG. In Effect, Curve. See the screen copy below. For this kind of fixture (extra colors assigned to several beams, no RGB color mix), only the Blue channel is listed (no Red, no Green).
Furthermore, even with Blue selected, no effect is generated (the colors in 2D view have been made with the faders).
The show file is attached (remove the dummy ".zip" extension).
BUG. In Effect, Curve. See the screen copy below. For this kind of fixture (extra colors assigned to several beams, no RGB color mix), only the Blue channel is listed (no Red, no Green).
Furthermore, even with Blue selected, no effect is generated (the colors in 2D view have been made with the faders).
The show file is attached (remove the dummy ".zip" extension).
- Attachments
-
- Test_Beta9_31_CurveEffectQuadrabeamBug.dvc.zip
- (18.07 KiB) Downloaded 409 times
Pol Davril
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be
Stage Manager & Technician
Daslight 4 - Version Jan 13 2020
http://www.hsd-productions.be
http://www.exprime-toi.be