Beta 9 - My bugs list

[PolDavril]

(61)
BUG. In EDIT, EFFECT.
See the show file attached (remove the dummy ".zip").
When generating an effect (I did "Curve"), the current step is not taken into account.
Example: the attached show file has a scene with 3 steps : step 1=Yellow, 2=Cyan, 3=Magenta.
The result is always the same : step 1=Cyan / middle steps=generated effect / last step = Magenta.
The Yellow step has gone.
This happens whatever the step selected and the state (on/off) of the "On current step" flag.
Additional question : what is "On current step" meant to do ? Replace the current step with a new sequence ? Insert a sequence before or after the current step ? Append the sequence to the end of the scene when it is off ?

[PolDavril]

(62)
BUG. For the audio file, the fade times are not properly used. For example, the parameters for the fadings are both set to 30 seconds but the actual fade in is about 10 seconds when the scene starts playing. For the fade out, when the scene is stopped, the sound volume remains a long time at the current level and the actual fade out begins much later, about 5 seconds before the end of the time.

(63)
IMPROVEMENT. It would be convenient if the path to the latest directory selected for audio files was saved in the global parameters.

[PolDavril]

(64)
BUG ? / IMPROVEMENT. The divider between "Effect generator" and 2D view can be moved completely to the right but not to the far left.
It would be convenient to be able to move this divider to the far left, in order to have a better view on 2D fixtures, especially when this panel is undocked and displayed on a second screen.

[PolDavril]

(65)
BUG. The 4th effect category is wrongly named "Color mixing" in the parameters, instead of "Matrix" (like anywhere else).

[PolDavril]

(66)
BUG (minor). The tooltip for Pan Tilt effect contains a slash character. Anywhere else, it's just "Pan Tilt". Ok, that's just a very minor detail but, unfortunately, I've seen it.

[PolDavril]

(67)
BUG ? When multiple scenes are selected in EDIT mode, the Fade on/off switch can be changed but the fade values are disabled. Is this intentional or is it a bug ?

[PolDavril]

(68)
BUG. When an effect is generated on universe 2, only 1 step is created.
The same generation on universe 1 works fine.
See the resulting show file attached (remove the dummy ".zip" extension).

[PolDavril]

(69)
BUG. A Curve effect is generated. Different colors are selected for the beams, as follows :
Red 1, Green 2, Blue 3, Red 4, Green 5, Blue 6.

Daslight30-CurveEffectColorBug1.jpg (74.04 KiB) Viewed 11240 times

The preview is correct in the effect window.
However, when this effect is generated, all colors mix together for all beams.
See the bad resulting show file attached (remove the dummy ".zip" extension).

[Jp]

Hi

We already fixed some of the issues, but some remains (didn't check the 69, 67 is not done either, 64 could be better and we didn't check the 62)

But we'll fix them sooner than later

[PolDavril]

(70)
BUG. In Effect, Curve. See the screen copy below. For this kind of fixture (extra colors assigned to several beams, no RGB color mix), only the Blue channel is listed (no Red, no Green).

Daslight31-CurveEffectQuadrabeamBug.jpg (65.23 KiB) Viewed 11219 times

Furthermore, even with Blue selected, no effect is generated (the colors in 2D view have been made with the faders).
The show file is attached (remove the dummy ".zip" extension).