Hi, Folks!
In my setup, I am using the Cameo Hydrabeam RGB in 32 channel Mode. It is a unit with 4 movable led heads. Each head can be triggerd by its own channels. But the unit has only one start adress.
If I activate an effect, for example pan/tilt, only the fourth head will be triggered. The pan/tilt-channel of channel 1-3 do not work. (The pan/tilt channels of the 4th head are the last pan/tilt channels in the row of the fixture)
What can I do to affect working also the first three heads? (under dvc 4 it seems to work. But because of some Midi bugs in the beta version, I will stay on dvc3 for the next time)
I would be nice, if some of you could help me.
Thank you
Greetings,
Olaf
Pan/Tilt-Problem
Re: Pan/Tilt-Problem
Hello to all!
In addition to my post I attach a file to this mail.
Please have a look on the fX-Generator and you will see that only Pan 4 an Tilt 4 can be affected, even, as you can see in the picture below, the fixture has 4 different Pan-/Tilt controls.
What do I have to do to get them all working?
(btw: in Daslight 4 all heads are running. But the problem there is that I cannot restrict the movements to only one or two heads auf my cameo)
Thanks to all who like to help a Daslight-newbie.
Greetings,
Olaf
In addition to my post I attach a file to this mail.
Please have a look on the fX-Generator and you will see that only Pan 4 an Tilt 4 can be affected, even, as you can see in the picture below, the fixture has 4 different Pan-/Tilt controls.
What do I have to do to get them all working?
(btw: in Daslight 4 all heads are running. But the problem there is that I cannot restrict the movements to only one or two heads auf my cameo)
Thanks to all who like to help a Daslight-newbie.
Greetings,
Olaf
- Attachments
-
- Daslight 3 fX-Generator.rar
- For better understanding
- (193.15 KiB) Downloaded 582 times