I have multiple RGB fixtures within a show with preprogrammed scenes including all fixtures.
Now I want to set in some situations one or two single fixtures to a custom configuration (depending on the stage setting). It should not be changed by any scene after that. If I set the faders to LTP it keeps the manual value only until the next step in the scene. HTP doesn't work either, as some scenes use higher values than my manual settings.
Is there any option to "lock" a fixture or channels until they are manually released?
Best regards
Steffen
Lock a fixture in Live mode
-
- Posts: 18
- Joined: Sat Apr 04, 2015 11:48 am
- Location: Germany
-
- Posts: 18
- Joined: Sat Apr 04, 2015 11:48 am
- Location: Germany
I checked your suggestion with the DVC3 demo version, as I don't have the interface, yet. LTP works as long as I stay within a scene. But as soon as I start a new scene (wich uses my "LTP fixture"), my manual fader settings are overwritten.
Maybe there is another way to reach my goal in Daslight: I want to create a couple of universal and colourful scenes for my 8 RGBW PAR fixtures which I can use on many different stages. But some events require that one or two of these PAR fixtures need to stay at a white light for the whole show (No, HTP does not work, as the values may be 90,90,90). Now I want to set these at the beginning to white and they should not change during the show. But as soon as I start the next scene, the values change in any mode (HTP, LTP, auto).
Any ideas?
Maybe there is another way to reach my goal in Daslight: I want to create a couple of universal and colourful scenes for my 8 RGBW PAR fixtures which I can use on many different stages. But some events require that one or two of these PAR fixtures need to stay at a white light for the whole show (No, HTP does not work, as the values may be 90,90,90). Now I want to set these at the beginning to white and they should not change during the show. But as soon as I start the next scene, the values change in any mode (HTP, LTP, auto).
Any ideas?
-
- Posts: 2
- Joined: Tue Mar 29, 2016 8:21 pm
- Operating System: Windows
Re: Lock a fixture in Live mode
you could make an effect with the selected fixtures and set the effect to be toggled instead of flash mode. Effects always overrule any scene dimmer values