Dear all,
I`m preparing a appartment installation with a dpad gold and RGB / RGBW LED stripes. I use 7 external switches in every room to activate and disactivate a scene.
My question is: Is it possible to jump inside a group from scene to scene by using the external switch?
For example: Livingroom has 5 scenes in his group, the last one is just black out. With every "klick" on the switch, the DPAD switches from scene to scene inside the specific group.
Is that possible?
And if not, that would be a gret feature
It is a huge appartment and the customer don`t want to have his phone always with him.
DPAD Gold with 8Port Block: jump to next scene
Hello Trice
This is not currently possible with the DPad gold, but it's something we're looking to implement in the future. Be careful with the port triggering because interference can be caused if the cable is more than a few meters long (for me, it's been ok with 20 meters).
Some customers use the Light Pad 3 remote app app with the iPod touch and a wall mount. The iPod touch is less than €200 with the first generation going for as little as €50, so depending on the budget, this may be something you would like to look into. Having said that, it is still useful to have a physical on/off switch in each room.
This is not currently possible with the DPad gold, but it's something we're looking to implement in the future. Be careful with the port triggering because interference can be caused if the cable is more than a few meters long (for me, it's been ok with 20 meters).
Some customers use the Light Pad 3 remote app app with the iPod touch and a wall mount. The iPod touch is less than €200 with the first generation going for as little as €50, so depending on the budget, this may be something you would like to look into. Having said that, it is still useful to have a physical on/off switch in each room.
Thanks a lo for the reply. I hope there will be a update in the future, but this function must includet in the software, right?
Yes the cables are up to 15 meters long. Is there a possibility to avoid possible interferences? for example with a high ohm resistor?
The customer use a Ipad mini, but i don`t know if the app supports more then one client at the same time. Otherwise, he could use 4-5 mobileclients instead of the Switches .
It would be also great, if a newer Version of DPAD has a DMX input, but there are no Sensor switches (or faders / sliders) availeable at the moment with programmeable start-adresses
Yes the cables are up to 15 meters long. Is there a possibility to avoid possible interferences? for example with a high ohm resistor?
The customer use a Ipad mini, but i don`t know if the app supports more then one client at the same time. Otherwise, he could use 4-5 mobileclients instead of the Switches .
It would be also great, if a newer Version of DPAD has a DMX input, but there are no Sensor switches (or faders / sliders) availeable at the moment with programmeable start-adresses