Page 1 of 1

Ledpar problems

Posted: Tue Oct 18, 2011 9:37 am
by BSS
When I give my ledpars one color, blue in this case, it should stay blue.
As you can see in the video, the pars go off and fade on again..
It are the ADJ ledpar 64 (6dmx channel)
in the visualizer, the ledpars stay on the way I want it

Here you can see the problem
http://youtu.be/lXZry2a911I

http://youtu.be/M2EqyP_RnvQ here you see that all the ledpars have this problem
they should just stay green

Posted: Tue Oct 18, 2011 10:02 pm
by stardustgr
can you post from daslight software the editor pic. to help you.
do you have the manual from the par leds the manual says that the par cans 64 american dj pro have 3-6-7 channels mayde you are in 7 channel mode like this
Channel Value Function
1 0 - 255 0% 100% RED

2 0 - 255 0% 100% GREEN

3 0 - 255 0% 100% BLUE

4 0 - 7 NOTHING-8 - 255 COLOR MACRO

5 0 - 15 NOTHING-16 - 255 STROBING/MACRO SPEED

6 0 - 31 NOTHING-32 - 63 DIM BRIGHT-64 - 95 BRIGHT DIM-96 - 127-DIM BRIGHT DIM-128 - 159 COLOR MIXING-160 - 191 (3 COLOR CHANGE)-192 - 223 (7 COLOR CHANGE)-224 - 255 SOUND ACTIVE

7 0 - 255 0% 100% DIMMER

• Channels 1, 2, and 3 will only work with Channel 5, when Channel 6 is not being used. Channels 4 & 5 work together.
• Channels 1, 2, and 3 will not work, when Channel 4 is being used. When units are daisy chained together in DMX Mode, channels 1, 2, and 3 must be “OFF” for units to sync together when using Channel 4. Channels 4 & 5 work together.
• When the values of Channel 6 are between 32 and 127, you must be using Channels 1, 2, 3, or all three combined. Channels 4 & 5 will not work
• When the values Channel 6 are between 128 and 223, Channel 5 will control the speed of the color mixing and changing.
• When the values of Channel 6 are between 224 and 255 (Sound Active), Channel 5 will control sound sensitivity.

THE 6 CHANNEL MODE IS THIS ONE
Channel Value Function
1 0 - 255 0% 100% RED

2 0 - 255 0% 100%GREEN

3 0 - 255 0% 100% BLUE

4 0 - 7 NOTHING- 8 - 255 COLOR MACRO

5 0 - 15 NOTHING-16 - 255 STROBING

6 .0 - 31 NOTHING-DIMMING CONTROL-32 - 63 DIM BRIGHT-64 - 95 BRIGHT DIM-96 - 127 DIM BRIGHT DIM-128 - 159 COLOR MIXING-160 - 191 (3 COLOR CHANGE)-192 - 223 (7 COLOR CHANGE)-224 - 255 SOUND ACTIVE

64P LED PRO DMX Values and Functions - 6 Channel
• Channels 1, 2, and 3 will only work with Channel 5, when Channel 6 is not being used. Channels 4 & 5 work together.
• Channels 1, 2, and 3 will not work, when Channel 4 is being used. When units are daisy chained together in DMX Mode, channels 1, 2, and 3 must be “OFF” for units to sync together when using Channel 4. Channels 4 & 5 work together.
• When the values of Channel 6 are between 32 and 127, you must be using Channels 1, 2, 3, or all three combined. Chan- nels 4 & 5 will not work
• When the values Channel 6 are between 128 and 223, Chan- nel 5 will control the speed of the color mixing and changing.
• When the values of Channel 6 are between 224 and 255 (Sound Active), Channel 5 will control sound sensitivity
CHEK YOUR EDITOR MAYDE THE CHANNEL 6 IN 6CHANNEL mode is on at full or 32-63 dmx

i hope i helped
tony greece

Posted: Thu Oct 20, 2011 7:56 pm
by BSS
i will try this when i am back home, i am on holiday now
thanks for the reply !

6 0 - 31 NOTHING
DIMMING CONTROL
32 - 63 DIM BRIGHT
64 - 95 BRIGHT DIM
96 - 127 DIM BRIGHT DIM
128 - 159 COLOR MIXING
160 - 191 3 COLOR CHANGE
192 - 223 7 COLOR CHANGE
224 - 255 SOUND ACTIVE
this is channel 6 of the ledpars

https://picasaweb.google.com/1061424935 ... 0610536562
here you can see a screenshot

http://www.new-line.nl/nl/led-parren/am ... _18537.htm these are my ledpars

Posted: Thu Oct 20, 2011 8:22 pm
by stardustgr
the manual is for this par led.
the pic that u have upload dosent open.try again.have nice holidays.
tony greece

Posted: Fri Oct 21, 2011 1:35 pm
by BSS

Posted: Fri Oct 21, 2011 2:27 pm
by stardustgr
so u see the ch 6 is at 63 dmx and 63 dmx is dim to bright thats why u have the problem do as the manual says or go to 7 channel version .
tony greece

Posted: Fri Oct 21, 2011 3:05 pm
by BSS
but it must be possible in 6channel mode also to control the brightness?
thats from 0 to 31 then?

Posted: Fri Oct 21, 2011 3:42 pm
by stardustgr
i hope so i dont know the led par that u have .the most of the times when they say 0 to 31 nothing they mean nothing lol.
if u raise only the first ch (red) all the others off what u get ?

Posted: Fri Oct 21, 2011 7:00 pm
by BSS
i will let you know when i am back home :)
on a showmaster dmx controller I use them in 6ch mode, but there are also master faders on the controller but they work for all the pars, so that is maybe a general 7th channel or so..

in daslight visualiser i have to set ch6 to a value, only the red channel gives no light.

Posted: Fri Oct 21, 2011 10:49 pm
by stardustgr
OK I FIND WHAT WAS RONG THE FILE SSL "64PAR" IS RONG THE DIM IS IN 6 CHANNEL BUT NOT AT 60 DMX LEVEL.ITS FROM 0 TO 31 I HAVE MAKE THE CORRECT FILE TO DOWNLOAD IT. TAKE FROM HERE

http://www.4shared.com/file/S5jlT6TE/AD ... mode_.html

now u goinig to be ok just replace the file at the library C:\Daslight Virtual Controller 2\ScanLibrary\american dj\par64.ssl with this one
:D :D :D :D :D :D :D
have a nice holidays
tony greece

Posted: Fri Oct 21, 2011 11:02 pm
by stardustgr
also the 7 channel mode have the same problem .here it is
http://www.4shared.com/file/quJdLdSS/64 ... -_7CH.html
:D :D :D :D

Posted: Sat Oct 29, 2011 3:47 pm
by BSS
okay thanks, when i have time (busy busy busy) i will try this :)

Posted: Fri Nov 04, 2011 8:43 am
by BSS
stardustgr wrote:OK I FIND WHAT WAS RONG THE FILE SSL "64PAR" IS RONG THE DIM IS IN 6 CHANNEL BUT NOT AT 60 DMX LEVEL.ITS FROM 0 TO 31 I HAVE MAKE THE CORRECT FILE TO DOWNLOAD IT. TAKE FROM HERE

http://www.4shared.com/file/S5jlT6TE/AD ... mode_.html

now u goinig to be ok just replace the file at the library C:\Daslight Virtual Controller 2\ScanLibrary\american dj\par64.ssl with this one
:D :D :D :D :D :D :D
have a nice holidays
tony greece

I only have the par "P64 LED.ssl" so i replaced that one with the downloaded one but nothing changed..
manually putting them on channel 32 works so they stay on, but selecting the full output still switches to channel 63

okay got it. I will have to make new shows for the pars but thats no problem
will this change be implemented in future downloads for daslight? If i want to reinstall it it will be okay?

Posted: Fri Nov 04, 2011 11:46 am
by stardustgr
hi
yes u mast not make a new show for the pars but just correct the shows that u have ch 6 at 32 and u going to be ok.
the files u download make a new folder with ur name in scan library and put them there so every time u going to update program the file its going to be always there.

nice to help u
tony greece :D