problem with dmx in
problem with dmx in
if i connect my dmx board daslight isnt responding to the signal i send out while the signal does show up if i test it withe the tools app
any tips for me ?
thx in advance
any tips for me ?
thx in advance
DJ rann
-
- Posts: 3
- Joined: Tue Jun 14, 2011 4:55 pm
same problem
hey.
ihave the same problem.
i use 2dmx out and 1dmx in.
with the version dec2010 everything works fine, now i did made a update to may2011 and the dmx in is not working at all anymore.
if i use the test tool the dmx in works, but not in the main programm.
i need urgentlyx a help cause i have tomorrow party.
ihave the same problem.
i use 2dmx out and 1dmx in.
with the version dec2010 everything works fine, now i did made a update to may2011 and the dmx in is not working at all anymore.
if i use the test tool the dmx in works, but not in the main programm.
i need urgentlyx a help cause i have tomorrow party.
-
- Posts: 3
- Joined: Mon Jun 27, 2011 10:15 am
-
- Posts: 14
- Joined: Sun Feb 20, 2011 11:17 am
- Location: Sydney, Australia
- Contact:
The Daslight program doesn't work with all DMX sources.
I have the same problem. I sent my interface to be tested by Daslight. Unfortunately DVC doesn't work with other pc based consoles.
While the viz is artnet compatible the DVC isn't, which is a shame!
My interface will recieve dmx in, however the DVC program won't due to a software conflict.
If you're using another pc based console and wing you need to run it separate to Daslight.
I hope this helps!
Regards,
Peter Knagge
Luminous Lights
I have the same problem. I sent my interface to be tested by Daslight. Unfortunately DVC doesn't work with other pc based consoles.
While the viz is artnet compatible the DVC isn't, which is a shame!
My interface will recieve dmx in, however the DVC program won't due to a software conflict.
If you're using another pc based console and wing you need to run it separate to Daslight.
I hope this helps!
Regards,
Peter Knagge
Luminous Lights
Hello,
got a same problem here, on tools every thing is working fine, i slide my fader and i see a signal coming in.
but if i use the program, and adres a fader like nothing happens, i tryed alot of things but it doenst work, i instaled the latest update of tools.
could somebody help me ?
a other problem is, that as i set fader 1 in universe 1 the input to universe 2 and out to universe 1, and then klik on adjust or ok , and i klik on it again the settings are back to default.
and a nother thing, where is the manuel for DMX-in on this forum ?
Thx
got a same problem here, on tools every thing is working fine, i slide my fader and i see a signal coming in.
but if i use the program, and adres a fader like nothing happens, i tryed alot of things but it doenst work, i instaled the latest update of tools.
could somebody help me ?
a other problem is, that as i set fader 1 in universe 1 the input to universe 2 and out to universe 1, and then klik on adjust or ok , and i klik on it again the settings are back to default.
and a nother thing, where is the manuel for DMX-in on this forum ?
Thx