DVC4 GZM networking

The top of the range Daslight product, with miniSD memory and 3 DMX universes

Moderators: TomHat, simonB, Benno

Aznable
Posts: 1
Joined: Thu Jul 06, 2017 5:25 pm
Operating System: Windows

DVC4 GZM networking

Postby Aznable » Thu Jul 06, 2017 5:31 pm

Network A: Home
Network B: location of the DVC.

From what i can understand the DVC has the ability to transmit code via an ethernet cable as long as it is connected to the network the programming computer is in(A). However, is it possible to connect to a DVC that is on a separate network (B) via the internet? Based on my knowledge of networking it should be able to.

Benno
Posts: 529
Joined: Tue Mar 31, 2015 3:31 pm
Location: Brighton
Contact:

Re: DVC4 GZM networking

Postby Benno » Tue Aug 22, 2017 2:46 pm

Hi Aznable,
However, is it possible to connect to a DVC that is on a separate network (B) via the internet?
Unfortunately this is not possible as the interface needs to be connected to the same local network that the computer running Daslight is on for the device to be detected by the software.
Benno
--
Product Support


Return to “DVC4 GZM / DVC3 GZM / DVC2 GZM”

Who is online

Users browsing this forum: No registered users and 1 guest

cron