Page 1 of 1
DVC4 GZM Dry Contact Ports
Posted: Sun Jul 17, 2016 3:18 pm
by gtj104
I have the 10 pin cable but can find any info on the pinout. Need info on which is ground and 1-8 inputs. Thanks, Gregg
Re: DVC4 GZM Dry Contact Ports
Posted: Mon Jul 25, 2016 10:35 am
by Benno
Hi Greg, check out the link below which should give you all the info you need. Kind regards.
https://www.daslight.com/manuals/#/en/h ... acts-input
Re: DVC4 GZM Dry Contact Ports
Posted: Tue Jul 26, 2016 1:26 am
by gtj104
Benno,
Thanks for the reply! I have one more question... If I connect port 1 and port 2 the number 3 address will be triggered... What amount of time between the closures must the the 2 ports be connected to ground for this to work? I don't want #1 address or #2 address to trigger before #3 address. Thanks, Gregg
Re: DVC4 GZM Dry Contact Ports
Posted: Wed Jul 27, 2016 7:27 am
by Benno
Hi Gregg, the connection needs to be joined for a 25th of a sec (40ms) to be registered. Hope that helps.