DVC4 GZM Dry Contact Ports

The top of the range Daslight product, with miniSD memory and 3 DMX universes

Moderators: TomHat, simonB, Benno

gtj104
Posts: 4
Joined: Sun Jul 17, 2016 3:14 pm
Operating System: Windows

DVC4 GZM Dry Contact Ports

Postby gtj104 » Sun Jul 17, 2016 3:18 pm

I have the 10 pin cable but can find any info on the pinout. Need info on which is ground and 1-8 inputs. Thanks, Gregg

Benno
Posts: 529
Joined: Tue Mar 31, 2015 3:31 pm
Location: Brighton
Contact:

Re: DVC4 GZM Dry Contact Ports

Postby Benno » Mon Jul 25, 2016 10:35 am

Hi Greg, check out the link below which should give you all the info you need. Kind regards.

https://www.daslight.com/manuals/#/en/h ... acts-input
Benno
--
Product Support

gtj104
Posts: 4
Joined: Sun Jul 17, 2016 3:14 pm
Operating System: Windows

Re: DVC4 GZM Dry Contact Ports

Postby gtj104 » Tue Jul 26, 2016 1:26 am

Benno,
Thanks for the reply! I have one more question... If I connect port 1 and port 2 the number 3 address will be triggered... What amount of time between the closures must the the 2 ports be connected to ground for this to work? I don't want #1 address or #2 address to trigger before #3 address. Thanks, Gregg

Benno
Posts: 529
Joined: Tue Mar 31, 2015 3:31 pm
Location: Brighton
Contact:

Re: DVC4 GZM Dry Contact Ports

Postby Benno » Wed Jul 27, 2016 7:27 am

Hi Gregg, the connection needs to be joined for a 25th of a sec (40ms) to be registered. Hope that helps.
Benno

--

Product Support


Return to “DVC4 GZM / DVC3 GZM / DVC2 GZM”

Who is online

Users browsing this forum: No registered users and 2 guests