We have new DVC4 Gold equipment, but there might be a problem with the device.
It was possible to delete the memory via the "Stand alone" Menue, but
- "write" is blanked out
- if i press "read" it says "check device, reading not possible"
- "test" does last forever so that we don't get any result.
What should I try?
Thank you in advance
Stand Alone - not possible to read/rewrite Memory
Re: Stand Alone - not possible to read/rewrite Memory
First please can I check you are using the latest Daslight 4 release (12.16 links below)
http://www.daslight.com/download.htm
Please below for a link to the Stand Alone section of the user manual which may help.
http://www.daslight.com/manuals/#/en/da ... tand-alone
http://www.daslight.com/download.htm
Have you clicked and dragged your scenes on to the device as per attached image? The Write button will not be activated until there are Scenes ready to be written to the device.- "write" is blanked out
You mentioned above you have deleted the memory from your device? If there is nothing stored on the device that message will appear.- if i press "read" it says "check device, reading not possible"
The Test button puts the device into Stand Alone mode so you can test scenes stored onto the device in Stand Alone. It will continue testing the memory until you click stop.- "test" does last forever so that we don't get any result.
Please below for a link to the Stand Alone section of the user manual which may help.
http://www.daslight.com/manuals/#/en/da ... tand-alone
- Attachments
-
- write.png (89.91 KiB) Viewed 7717 times
Benno
--
Product Support
--
Product Support