DVC2 GOLD / DMX Low Signal / Fixture Flip out.

512 In, 512 out or 2x512 out. Stand Alone memory (512 out)

Moderators: TomHat, simonB, Benno

garyalsop
Posts: 1
Joined: Tue Sep 18, 2012 1:58 pm
Location: United Kingdom
Contact:

DVC2 GOLD / DMX Low Signal / Fixture Flip out.

Postby garyalsop » Tue Sep 18, 2012 2:05 pm

Hi,

We have a number of different fixtures which we want to control from our DVC2 Gold but are having some serious flip outs with some of our fixtures. We are using quality shielded DMX cables and don't seem to get any problems from our avolites tiger desk. (DMX Controller)

We have 12 moving head AD VisiBeam 5R and when trying to control more than 4 they tend to start twitching and often just going off and doing random things. This has been the case since purchase as it just doesn't seem to like handling more than a few fixtures.

Could anyone offer any thing to try etc. I think it could possibly be a faulty unit as I can only imagine the signal just isn't strong enough?

Many Thanks
Gary Alsop

Richard CSL
Posts: 457
Joined: Fri Jul 11, 2008 10:30 am
Location: Orlando. Florida
Contact:

Postby Richard CSL » Tue Sep 18, 2012 5:27 pm

probably your best solution is to purchase a dmx splitter from Thomann or alike.

DVC does spit out dmx according to the proper spec, but some lights (especially older ones) have a problem with the refresh rate from DVC. especially suseptable are older demux units as well.

using a splitter solved my problems and you may wish to use a terminating plug at the end of the line just to make sure.
Music sets the mood Lighting sets the ambience

lucybrade
Posts: 1
Joined: Fri Apr 10, 2015 4:43 pm

Postby lucybrade » Sat Apr 11, 2015 6:46 am

If I install a second operation system WinXPx32 (or other x32) SUIDI5A driver will work?


Return to “DVC4 GOLD / DVC3 GOLD / DVC2 GOLD”

Who is online

Users browsing this forum: No registered users and 2 guests