Daslight Forum

Gentlemen: I've been following your discussion and would note that the Am. DJ MyDMX Software has a manual on their web site, "http://www.americandj.com/pdffiles/mydmx-version1-0.pdf" It appears that the Am. DJ Software has the same 43 minute limitation. See page 15. paragraph 6. In additio...

Dear Frans: Andre is correct, the Interface will work in stand-alone mode with the computer powered up and the USB Cable attached. The old file "manual_hardw.pdf" on page 6 shows a photo of the Power Supply that came with the DVC2 IP 512 Interface. The Power Supply for the DVC2 GZM interfa...

Dear Frans: According to the DVC2 128-M product description, "This interface requires a 9V power supply in stand-alone mode." Daslight shipped a 9V power supply with the other interfaces I have received from them. The 9V power supply plugged into the USB jack on the Interface to power the ...

Create a Driver to identify the GZM Interface as a Network device, much like a USB printer. This would provide some of the utility of the IP Interface by permitting access to the Interface from different computers on the same Local Area Network.

Thank You.

The "Write the Interface Stand Alone Memory" button on the "Stand Alone Memory Map" works and writes files to the GZM Interface's Memory (i.e. Mini SD Card). The LED read "A01. A02, ...." After exiting the Stand Alone Mode and the returning to it, the "Memory Read&...

Just an additional comment on the question of choosing an IP Interface. My reason for selecting the IP Interface (Ethernet) over a USB version had to do with the system differences I anticipated encountering: 1. OPERATING SYSTEMS. I have a Laptop using Vista Premium Home Edition 64 Bit operating sys...

Welcome to the forum. Thank you for sharing the Daslight Company line about the discontinuance of the IP Interface. If this were true, I would still have the Daslight IP Interface. However, the problems encountered were more significant than simply being similar to the Sunlite Interface. I look forw...

With the upgrade GZM Interface, came instructions to install the latest DVC2 Software release. The latest on the Website was 12/2009 which installed as Dec 2, 2009. I deleted the prior Beta releases and following installation of of the 12/2009 version, the GZM Interface was recognized by both Window...

Daslight DVC2 IP 512 Interface appears to have been withdrawn from the product line. A review of the Interfaces Web Page (www.daslight.com/interfaces.php); the Products Web Page (www.daslight.com/references.php); and the Store Web Page shows no listing for the IP 512 Interface. I also note that the ...

Daslight America advised on 25 Nov.: “…It was essentially to be relatively quick programming of the DVC2 Beta version of DasLight to correct the function with the DVC2 IP interface. While we have managed to fix this, it seems there are still some related issues to be addressed. …” And Thus the Beat ...

Following received from Daslight America: "... even though I was able to apparently write to the interface memory successfully, as you were, it seems DasLight Beta still has trouble reading the interface memory. Upon further testing revealed that DasLight Beta currently does not actually write ...

Daslight Product Descriptions for DVC2 IP – Daslight Virtual Controller 2 IP 512 provide: “STAND-ALONE MODE DMX: 512 Output Channels. … MEMORY: The internal memory offers a storage capacity of 230 steps for 512 channels and many more steps with less channels.” Daslight Documentation provided as Adob...

I offer my apology for not responding earlier to your inquiry. I have been traveling for the past 3 weeks and away from the Daslight IP interface, software and documentation. I noted the response you received from Andre and it appears to provide the technical information I could not while traveling....

Dear Andre: Thanks for your reply. You and the DVC2 Beta Software are in the same boat -- neither has seen the IP Interface. I was informed by DASLIGHT America that there is a "Production Glitch" in writing the firmware to the Interface. The firmware needs to be done twice or it doesn't ta...

Connecting and "Pinging" the IP Interface has worked on Microsoft XP, Vista Home Basic (32 bit) and Vista Home Premium (64 bit). However the DVC2 Beta software does not recognize the IP Interface. Upon booting DVC2 Beta the "About" screen shows no Interface and using the Tools-In...